AutomotiveSports

Essential Tips For Maintaining Your Bike Parts!

You might have heard rumors or gone into a shop and noticed. Bike parts issues have been experienced across the bike industry. 

Due to this reason, some brands and stores have had a harder hit. It’s evident that none of us would like it. Finding a bike or even the maintenance parts can be challenging. But you can read about the tips to upgrade bike parts and how to do maintenance of bike parts will read in this blog. 

Everyone is aware of the COVID-19 pandemic that caused problems and messed things up. Businesses from bike shops to restaurants and travel were all turned upside down and were at a loss. Every single day passed made this equation more complex. We also had a difficult time but never disappointed our customers. 

With that, throwing a leg over components is bliss. Bicycles are simple machines. Isn’t it? NO! These are incredibly complicated simple machines that assemble a myriad of pieces. It needs care and attention to be in sync and create a healthy economy. In this article, we’ll start off with a series of bike maintenance and service. 

Let’s start off with the basics!

Full-suspension trail-blazing bicycles are inconceivable machines that perform at exceptionally undeniable levels in this era. However, they do require ordinary love and care to work at the extremes that we put them through. With the tips that we’ll go through, you can have confidence that your bicycle will run as expected in the middle of the additional top to bottom upkeep spans. Also, you can draw out the existence of wearable parts like your drive-train, heading, and seals. Here we go!

Cleaning And Lubing Your Chain

Cleaning the bike chain before or after every ride may seem excessive, but doing so may extend the life of your drive train (chain, cassette, and chainring), improve gear shifting, and make things much quieter. Every chain lubricant won’t be the same, so choosing the one that suits your riding conditions can work out.

Step-by-step instructions for cleaning and lubing bike chain:

  • Degrease your chain
  • If you don’t have any particular tool, use a brush for degreasing
  • Rub down the chain with soapy water
  • Rinse to remove the excess degreaser
  • Choose your lube
  • Lube the chain
  • Wipe off excess lube, if any. You’re ready to ride!

Pro-Tip* After lubing the chain, backpedal a few revolutions. Then wipe off your chain with a clean and dry rag. This will make lube in the rollers and between the plates.

Checking Air Pressure

Tubeless setups are popular among mountain cyclists these days since they lessen the risk of pinch flatting. They let you run lower air pressure than you would otherwise. It does imply that the tires will gradually lose air over time, so check your tire pressure before each trip. Also, bring a spare tube and the tools to change it with you when you ride so that if you slice your tube, you can replace it.

Pro-Tip* Remove as much air from your punctured tire as possible. This will quickly help to remove the flat tire.

Tighten Pivot Bolts

There is a wide range of suspension stages in the full-suspension off-road bicycles of today. However, one thing remains constant for them all – bunches of pivots. These can come free after some time, so it is vital to look that your bolts and axles are tight. 

This should mainly be done each three or four rides, but it’ll be smart to make it into a habit and take a look after each ride. Ensuring that these are tight will keep any disturbing creeks from creating, or surprisingly more terrible, play and wobble on your edge.

Cleaning Dust wiper Seals

The modern mountain bike suspensions are impressive and handy these days. They come in a variety and require regular cleaning to maintain top performance between overhauls. Doing this once, before or after every ride, will extend the seal’s life span. Thus, it will keep your bike running butter smooth!

Note* Before starting, ensure the exterior of the fork is clean and dry. The area around the dust wipers also needs to be very clean.

Checking Headsets

Bike’s headsets are often overlooked, and this should be avoided. These two headings take the brunt of misuse that your front wheel gets and seldom put up any complaint. Ensuring that the headset remains tight is wise, as a free headset can ultimately prompt a damaged frame. 

Good Rules Of Thumb:

  • Never loan tools
  • Grease and lube your bicycle at regular intervals
  • No excuses for changing a flat
  • Do keep track of the order when disassembling something as it takes the mystery out of putting it back together
  • Stay hydrated
  • Keep some salt pills along with you
  • Always wear wright socks when biking off-road and on-road. This will help provide moisture and get rid of blisters in the long run
  • Carry helmet, gloves, and sunglasses
  • Keep light snacks in your backpack
  • Most important tools on a ride: multitool (with a chain breaker), a pump (or CO2), patch kit (or tube)

Conclusion:

So, there you have it! That’s all! Make it a habit of sparing at least five minutes before each ride to run through this checklist. I hope this guide will help ensure a great time on the trails and will increase the longevity of your bike parts. Further, if you need to shop any of them, we at The Podium online store guarantee 100% satisfaction by providing quality equipment! Grab your deals now. Happy shopping! 

 

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button