Harvest Rainwater And Build Eco-Friendly Infrastructures

The world has only one-fourth of land that is dry other than that, the remaining three-fourth of the area is only water. Yet, the world faces water shortage problems because the water present in oceans and seas is not suitable to use. Therefore, each year all the regions around the world at some point face water depletion problem. As the water available to us isn’t suitable to use, now we are left with only finding an alternative water source. One such solution can be to save rainwater as it is pure, clean water which after some filtration becomes perfect to use for meeting any water need. In areas where the water shortage problem has been present forever, people have saved rainwater to meet their water needs. This can now become a one-stop solution for the constant water depletion problem of the entire world. We take rainwater for granted and let it go down the drain, but if we start harvesting it, the world will have water in the future; otherwise, the condition will get even worse than the present. Save rainwater for the future!

Rainwater Harvesting Techniques

There need to be proper infrastructures for harvesting rainwater to collect it in its most pure form and save it for later. This will require a lot of work beforehand to eliminate the problem of water shortage in the world. Not only do we have to collect the rainwater but then further process it to remove all of its impurities. Rainwater harvesting maestros have managed to design many definite techniques and infrastructures to lower the rate of water shortage significantly around the world if we come to use them. Let us explore some of the workable and intelligent techniques of rainwater harvesting:

• Sponge City Module:

This is the most recent concept getting all the hype, and now it’s about the world’s future. The idea of the sponge city module is to turn the surface into a sponge that can absorb all the water for harvesting. The idea behind the sponge is to install such adequate water collecting systems inside the earth’s surface that will collect all the rainwater and then store it after purifying so that when water scarcity occurs, your stored water can be utilized. Manufacturers have been working to produce effective water harvesting products, which are very handy and low maintenance to use.

Manufacturers of sponge city modules such as Tidelion have already introduced a wide range of hoppers, filters, and many other unique states of the art products in the market. Many cities have already jumped onto the bandwagon and are now completely transformed. However, it will take time for the entire world to come on the same page. Step by few will surely bring change, but the need is for change on the master level.

• Water Dams:

This has been a relatively old idea adopted in all the cities of the world, especially in areas where excessive rainfall occurs. The chances of flooding in such areas are very high, so to stop the destruction caused by rainwater flooding, dams should be created to store the water in one place. Therefore, dams help achieve the twin benefit of preventing floods and reducing the water depletion problem. Other than this, dams are also a good source of producing electricity from water. The pressure of water flowing through a dam is very high, which helps to make a significant amount of electricity at the lowest price possible.

• Water Barrages:

This is also like a water dam; the only difference is that this one has several openings, unlike a barrier which only has one entrance. It can control the flow of water flowing through it by maintaining the opening and closing of its gates. It is also different from a dam in that a dam is a reservoir that collects water only, whereas a barrage is a reservoir, plus it diverts the water into canals to other places.

• Water Barrels:

This is the cheapest way of saving rainwater; you will have to place a water barrel under the drainage downspout, and the rainwater on your roof will fall into your barrel. This is the easiest way to store rainwater without any hustle. Don’t let this pure water source go into waste just like that; instead, get a water barrel and save it.

• Rain Saucer:

This is another technique very similar to the water barrel technique. This rain saucer is wide enough to collect water from a barrel placed right below it. This doesn’t bound you to put your barrel below the downspout only. You can place a barrel under your downspout and place these rain saucers with barrels in the area around your house; in this way, you will save a large amount of rainwater.

• Field Trenches:

This is another very efficient technique that helps not to let rainwater go down the drain. These field trenches are for storing rainwater for the irrigation of farms. It is already a big hustle to irrigate farms through pipes and all but not with this one. These trenches store rainwater alongside the path of farms. Farmers can then efficiently irrigate the field with trench water and enjoy a prosperous life even in dry seasons.

Conclusion:

The world already has been facing water scarcity due to global warming and other reasons; therefore, these eco-friendly home techniques are now our only rescue if we want the future, which is better than our present. You can opt for any method that sounds reasonable to you and start saving rainwater as soon as possible. Not only as a social responsibility, one must think about water-saving for their future generations. However, as technology is progressing, there is no doubt that various other options will also be available to us in the future. Don’t wait until then; start harvesting rainwater for your good, and then you can switch to any technique that comes in the end. The sooner, the better, the later, the worse. As it is rightly said;

Water preservation to prevent future devastation