Site icon Articles Do

How To Sew Thick Fabrics At Home?

sewing thick fabrics

They have a connection. This is especially true when you have an urgent job, and your home sewing machine cannot handle the thick layers of fabric you are feeding it through.

This includes sewing with layers of upholstery fabrics such as denim, vinyl, and leather, quilted fabrics, and fake fur.

Thick fabrics have bulky seam allowances. It is often difficult to sew over layers of thick fabric with a home machine.

The nightmare begins when seams cross. You might experience skipped stitches, thread snapping, or needle breaking. There are many swear words.

Medium-weight fabrics are best suited for home sewing machines such as cs6000i sewing machine. There should be no more than three to four layers.

These machines can develop frustrating (and inevitable, given their fragile bodies) issues a lot earlier than they should. These delicate machines are designed for simple tasks, but there are simple ways to overcome these hiccups.

Choose projects carefully

This is especially true when sewing with thick fabric. So that you don’t have to sew as much, make simple dresses that aren’t too complicated.

Avoid extra seams, tucks, or shoulder pads, as well as unnecessary buttonholes. Before you try on the garment, test the buttonhole combination on scrap fabric.

Some stitches might not look the same on thick fabrics as on other fabrics. You can add lining to your garment by using hand-sewn french tacks instead of actual machine sewing.

Check this about your sewing machine

Are you able to sew those layers on your machine? Make sure that your layers fit under the pressure foot of the machine.

It should be under the presser feet before sewing. To raise the presser feet lever, you can lift the lever. If it is not resolve the problem, you can try the following two tricks to get your fabric to behave and adjust.

Use some steam on the fabric

Steam can soften fabrics and make them more malleable when they are wet. This can be done with the steam from an iron. Move the iron a little further away from the fabric to let the steam penetrate the fabrics.

Use a Hammer, or a tailor’s clapper

A small hammer can be used to loosen stubborn areas such as seams that cross. This is a great way to sew thick hems on jeans.

If you have a Tailor’s Clapper, you can use it to press the thick seams down with the tool. This tool is made from wood and has rounded edges.

This is a great tool for quilters who need to work with multiple seams simultaneously. To prevent damage, make sure you place another cloth between your hammer and the fabric that you are sewing.

Most importantly, as a reliable model is crucial, read the singer heavy duty 4423 review to find out how this can be the most suitable sewing machine for you.

No Pins! Instead, use clips

To keep layers of fabric together, you can use paper clips, binder clippings, or clothespins. Make sure to take them out as you sew.

Choose Proper interfacing

Interfacing can give you a crispier look even with thick fabrics. You can use a lightweight fusible or silk organza interfacing to give the fabric that crispiness without making it more difficult or heavier to sew. The fabrics should be cut with the same grain as their outer fabrics.

Use a heavy-duty needle and suitable thread

Heavy-duty needles beginning at No. 90/14 (or a Jeans needle which is normally No. 16 or the largest universal needle size you have may be required to sew heavy-weight fabrics.

A thicker thread, such as a strong polyester thread or jeans thread, can be used. The thread’s size will determine how thick it is. For thick sewing fabrics, a 30-50 size thread should be used.

Use a longer stitch length or change stitch

You can use a longer length than the 2.5-inch standard length to make the straight stitch. A 3.5-inch stitch is the best. This depends on the fabric.

You can use a length of 3 for thick fabrics such as canvas and denim. (Adjustable from 2.6). Use 3.5 for thicker fabrics like faux leather, cork, and leather. You can also try small zig-zag stitches if this fails.

Clip and trim

With thick fabrics, seam finishes can be difficult. If you want to neatly finish your seam allowance, trim and clip generously. This is how it’s done.

Finish the seam of thick fabrics perfectly by trimming one seam allowance to 1/4 inches after sewing a regular seam.

However, a model such as a janome derby sewing machine will be a perfect match for this task. To cover the trimmed seam allowance, press the longer seam allowance—Topstitch from the outside.

Make sure you catch the seam allowance that is pressed to the back. If seams cross, i.e., If you are sewing more than one seam together, make sure to trim the seam allowances diagonally.

Use a walking foot

A walking foot can go through thicker layers more easily than a regular one. It is used to make quilting stitches, which are quite bulky. Learn more about using a walking foot here.

Use the hand wheel

You can stop the electric motor when you reach thick layers and turn the handwheel to move the machine. This is your control, and the needle will not be taxed.

Hand sewing thick fabric

If your machine continues to refuse to cooperate and you only have a small area of the fabric to work with, you can hand-sew using a thick hand sewing needle (or jeans) and heavy-duty (or both) thread.

It is a good idea (by hand sewing) to stitch if there are many layers. The more complicated the project or layers, the better to make sure you have enough and lots of basting stitches.

A loose catch stitch can be used to hem thick fabrics. This will give them a little stretch and make it easy to sew. This post explains invisible stitches in more detail.

Use clever sewing techniques

It can be difficult to hem thick fabrics. You may not like the bulky appearance of turned hems. For thick fabrics, you can use a faced hem.

A bias strip of medium-weight fabric, approximately 2-3 inches in width, can be used. As you would for a binding, sew it. For a nearly invisible finishing touch, you can hand sew the binding on the back.

Use a Serger

A 4 thread serger stitch can be used to sew the seam instead of a conventional seam. This is only possible if you own a serger. This is a post about buying sergers.

Read more : Everything About Carpenters Tool Belt.

Exit mobile version